2 connecting interface cable, Stp-103ii, Rev. 1.02 – BIXOLON STP-103II User Manual
Page 10
Advertising
Rev. 1.02
- 10 -
STP-103II
2-2 Connecting Interface Cable
In order to connect the printer to the computer, you need a proper serial, parallel, or USB
interface cable.
- Check that both computer and printer are turned off,
and connect the cable connector to the interface connector of the printer.
- Fasten the screws on both sides of the cable connector.
- Connect the other end of the cable to the computer.
25 Pin Female Type
25-Pin Female Type
Advertising
This manual is related to the following products: