BIXOLON STP-103II - Manual (Page 18)

Rev. 1.02 - 18 -
STP-103II
7. Specifications
Printing method Thermal line printing
Dot pitch 203Dpi (8 dot/mm)
Printing width 48mm
Paper width 58.0±0.5mm
Characters per line 32 (Font A) (12x24), 42 (Font B) (9x17), 42 (Font C) (9x24)
Printing speed
About 2.75 inches/sec
70 mm/sec
at 25℃/printing duty 12.5%
Paper
Thickness of the used paper: 0.062 ~ 0.075mm
Diameter of the paper roll: Ø 60mm
Paper roll size
-
Inner diameter: Ø12mm (0.47”)
-
Outer diameter: Ø18mm (0.71”)
Buffer size 15K bytes
SMPS supply voltage 100~240 VAC
Conditions
Temperature
0 ~ 45℃ (operating)
-20 ~ 60℃ (storage)
Humidity
10 ~ 80% RH (operating)
10 ~ 90% RH (storage)
MCBF
Mechanism 30,000,000 line
Head 50km
- This equipment is indooruse and all the communication hiring are limited to inside of
the building.
- The switch is the disconnecting device. Turn off switch from any hazard.