Casella CEL CEL-206 - Manual (Page 13)

Casella USA
17 Old Nashua Rd #15
Amherst, NH 03031 USA
Having completed the interconnections to the CEL-206 the threshold exceeded signal will cause
the attenuators to be switched into each of the individual signal channels provided on the CEL-
209. All the signal lines associated with the source to be controlled should now be routed
through the CEL-209.
3 Specification
Number of Channels
12 - May be extended by employing a second CEL-209 unit
Connectors Standard 0.25in Jacks
Attenuation 20dB (nominal)
Input impedance <500 Ohms
Output loading >10K Ohms
[email protected] Page 13 of 16 Tel: (800) 366-2966
www.casellausa.com 2 Mar 2009 Fax: (603) 672-8053