CUE PEX - Manual (Page 18)

button makes it stop at the currently reached value. If button down is held, the value does not
go all the way to 0%, but stops at 5 %. For a total switch-off use repeated quick press.
− Short press fade - speed of dimming in case of normal button press, 0-99.9 sec.
− Long press fade - speed of dimming in case of long time button press, 0-99.9 sec.
− Minimum - minimum output value, 0-99 %.
− Maximum - maximum output value, 0-99 %.
− Intermediate - intermediate output value, 0-99 % for solid state mode.
• Label - Channel legend which can consist of up to 22 characters.
4.4.2. Direct control of dimmable channels
If the On-line box is checked, any changes made to the parameters Minimum, Intermediate and
Maximum are immediately transferred to the output of the module, which makes it possible to control
the real brightness of the light source. If the On-line switch is not activated, the output of the module
remains unchanged during setting. The current value of the output is shown next to the On-line, being
constantly updated.
User Manual PEX Software
www.cue.cz
Page 18 of 25