Junger Audio b46 - Digital Audio Leveler - Manual (Page 25)

5. OPERATION
Mode menu shows sync setting and input selection.
5.3
MODE MENU
Adjustments are made by pushing and turning CONTROL
knob (see 5.1). Return to level display with EXIT.
SYNC< LINK
AES 1 + 2 3 + 4
SYNC MODE: selection of sync signal input
CH 1/2 - sync on digital input 1/2
EXT - sync on external sync input
VIDEO - sync on video sync input
SDI - sync on SDI input
LINK MODE: all channels independent or following link
combinations:
1+2, 3+4, 1+2 & 3+4
5.4
INPUT MENU
Input menu shows input setting of the unit. There are two
windows available by pushing INPUT EDIT button once or
twice.
Adjustments are made by pushing and turning CONTROL knob
(see 5.1). Return to level display with EXIT.
1. menu
IN12< TR12 IN34 TR34
AES off SDI on
INxx: selection of signal input
AES digital input AES/EBU
SDI SDI input (embedded audio)
TRxx: selection of transparent input
on/off for bit transparent path between
auto input and output (for Dolby E)
If set to AUTO the path is switched to
transparent automatically if the
non-audio flag in the AES/EBU or SDI
signal is set.
2. menu (just if SDI interface is present)
SDI GROUPS: > IN< OUT
1 1
IN: selection of SDI group for deembedding
input signals 1...4
OUT: selection of SDI group for embedding
output signals 1...4
operation manual b46, chapter 5 -Operation- page 5-3