Monroe Electronics R197AV - Manual (Page 7)

Appplications
General Switching
Control by Time
The R-197AV can be directly connected to Monroe R153 program timers so that program
signals can be switched according to time schedules at the broadcast point or headend. The
switch-timer interface would look something like the following graphic.
Control by LAN
The R-197AV may also be easily controlled by anyone on the local network with a web
browser. The unit has an included server, with a fixed IP address. The interface is self explana-
tory. Refer to LAN Setup for configuring this control function.
Control by DTMF
The R-197AV can also be operated by one of the Monroe DTMF remote controls that allow
switch operation by DTMF signaling from a standard dial-up telephone (model 6002) or by a
dry 600 ohm audio line (model 6003). Connections for this application are shown in the follow-
ing graphic.
7