Pengo DT-5 - Manual (Page 13)

Two Speed (DT & RT) Series Manual 13
PRODUCT SPECIFICATIONS
Two speed models must have a minimum of 20GPM.
Output speed and torque specifi cations are NOT listed at 100% effi ciency. Maximum effi ciencies have been applied to the torque
and speed charts according to the manufacturers recommendations. Speed and torque output are dependent on the overall
system effi ciencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specifi c
applications please contact Pengo. Pengo has made every attempt to present accurate and suitable information published on this
document. This document should be used for information and comparative purposed only. When application specifi c information is
required, please contact Pengo.
Pengo continually looks for new ways to improve its products. Therefore, Pengo reserves the right to make changes to our
products and specifi cations without notice.
TOTAL UNIT WEIGHT 1440 LBS / 653 Kg
HYDRAULIC MOTOR INFORMATION
Displacement 13.9 cu/in (227cc)
Motor Type Two Speed Bi-Directional
Motor Output Shaft 1-1/4" Spline 14T
Motor Mount SAE - C 4 Bolt
Motor Ports 1-5/8" - 12 UN-2B
Cross Over Pressure Relief Set @ 3100 psi
PLANETARY GEARBOX INFORMATION
Gearbox Type Planetary Three Stage
Reduction Ratio 90.39:1
Output Shaft 130mm Square
Oil Capacity 3.7 Gallons
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 60,000 lbs.
REFERENCE TORQUE CHART
Pressure PSI (Bar) High Torque (ft/lbs) Low Torque (ft/lbs)
1600 (110) 21074 10537
1800 (124) 23708 11854
2000 (137) 26343 13171
2200 (151) 28976 14488
2400 (165) 31611 15806
2600 (179) 34245 17122
2800 (193) 36880 18439
3000 (206) 39514 19757
REFERENCE SPEED CHART
Flow GPM (Liter) Low Spd (rpm) High Spd (rpm)
20 (75) 3 6
30 (113) 4 9
40 (151) 6 12
50 (190) 7 15
AUGER DRIVE MODEL
rt-40
TOTAL UNIT WEIGHT 1440 LBS / 653 Kg
HYDRAULIC MOTOR INFORMATION
Displacement 15.8 cu/in (260cc)
Motor Type Two Speed Bi-Directional
Motor Output Shaft 1-1/4" Spline 14T
Motor Mount SAE - C 4 Bolt
Motor Ports 1-5/8" - 12 UN-2B
Cross Over Pressure Relief Set @ 3100 psi
PLANETARY GEARBOX INFORMATION
Gearbox Type Planetary Three Stage
Reduction Ratio 83.78:1
Output Shaft 130mm Square
Oil Capacity 4.0 Gallons
Oil Type SAE 80W90 GL-5
Shaft Pull Out (lbs.) 60,000 lbs.
REFERENCE TORQUE CHART
Pressure PSI (Bar) High Torque (ft/lbs) Low Torque (ft/lbs)
1600 (110) 22328 9766
1800 (124) 25119 10987
2000 (137) 27910 12208
2200 (151) 30701 13428
2400 (165) 33492 14650
2600 (179) 36283 15870
2800 (193) 39074 17091
3000 (206) 41865 18312
REFERENCE SPEED CHART
Flow GPM (Liter) Low Spd (rpm) High Spd (rpm)
20 (75) 3 6
30 (113) 4 9
40 (151) 5 13
50 (190) 7 16
AUGER DRIVE MODEL
rt-40
Discontinued Model as of June 2013 Current RT-40 Model Specifi cations