Pengo DT-5 - Manual (Page 7)

Two Speed (DT & RT) Series Manual 7
One easy phone call to 811 starts the process to get your underground utility lines marked for free. When you call
811 from anywhere in the country (USA), your call will be routed to your local One Call Center. Local One Call Center
operators will ask you for the location of your digging job and route your call to affected utility companies. Your utility
companies will then send a professional locator to your location to mark your lines within a few days. Once your
underground lines have been marked, you will know the approximate location of your utility lines and can dig safely,
because knowing what’s below protects you and your family.
Every state has different rules and regulations governing digging, some stricter than others. In addition, 62 separate
One Call Centers serve different areas of the country; now 811 will connect you directly to your local one call center.
For more information go to www.call811.com
Always call 811 before starting any digging project!
**Customers outside the United States need to contact their local utility company for underground safety regulations
specifi c to the area.
GENERAL PRECAUTIONS - CONTINUED
SERIAL NUMBER IDENTIFICATION
Its important to make the correct reference to the serial number of the unit when making repairs
or ordering parts. The serial number plate will be located near the top of the Anchor / Auger Drive
attachment. Below is an example of the serial number plate.
Figure 1