Proceed DAP (non-CE) - Manual (Page 14)

14
4 AES/EBU DIGITAL INPUT
This input accepts digital audio conforming to the 110
Ω
AES/EBU digital
interface standard (via a cable equipped with XLR-type connectors) from
the digital output of a digital FM tuner, compact disc player, laserdisc player,
or digital audio recorder.
The pin assignments of these AES/EBU XLR-type female input connectors
are:
2 1
3
Pin 1: Shield
Pin 2: Digital + (non-inverting)
Pin 3: Digital – (inverting)
Connector ground lug: chassis ground
These pin assignments are consistent with the standards adopted by the
Audio Engineering Society and the European Broadcast Union. Refer to the
operating manuals of your digital sources to verify that the pin assignments
of their output connectors correspond to the DAP. If not, wire the cables so
that the appropriate output pin connects to the equivalent input pin.
Connect the AES/EBU output of your digital source component to the AES/
EBU (XLR) input of the DAP using a high quality 110
Ω
cable such as Madri-
gal MDC-1.
5 BNC DIGITAL INPUT
This input accepts digital audio conforming to the 75
Ω
S/PDIF digital inter-
face standard (via a cable equipped with BNC-type connectors) from the
digital output of a digital FM tuner, compact disc player, laserdisc player, or
digital audio recorder.
Connect the digital output of your digital source component to the BNC
input of the DAP using a high quality 75
Ω
cable such as Madrigal MDC-2.
6 SPDIF (RCA) DIGITAL INPUT
This input accepts digital audio conforming to the 75
Ω
S/PDIF digital inter-
face standard (via a cable equipped with RCA-type connectors) from the
digital output of a digital FM tuner, compact disc player, laserdisc player, or
digital audio recorder.
Connect the digital output of your digital source component to the RCA in-
put of the DAP using a high quality 75
Ω
cable such as Madrigal MDC-2.
7 EIAJ DIGITAL INPUT
This input accepts digital audio conforming to the EIAJ optical (sometimes
called “Toslink”) digital interface standard from the EIAJ digital output of a
digital FM tuner, compact disc player, laserdisc player, or digital audio re-
corder.
Connect the digital output of your digital source component to the EIAJ
input of the DAP using a high quality EIAJ optical cable.