Proceed DAP (non-CE) - Manual (Page 7)

7
Operating Voltage
The DAP digital audio processor is set at the factory (internally) for 100V, 120V,
200V, 220V, or 240V AC mains operation as appropriate for the country in which
it is to be sold. (230V only in European Union countries, in compliance with CE
regulations.) Make sure that the label on the rear of the DAP indicates the correct
AC operating voltage for your location. The operating voltage cannot be changed
by the user, and any attempt to do so will void the warranty.
If the voltage indicated is incorrect relative to that supplied in your area, see your
Proceed dealer.
DAP bottom-panel label
WARNING: BEFORE ATTEMPTING TO OPERATE THIS DEVICE,
REFER TO OWNER’S MANUAL FOR PROPER OPERATING
INSTRUCTIONS AND SAFETY PRECAUTIONS. HAZARDOUS
VOLTAGE AVAILABLE INSIDE; DISCONNECT AC – MAINS
CABLE BEFORE OPENING UNIT.
d e s i g n e d a n d m a n u f a c t u re d i n U S A
MADRIGAL AUDIO LABORATORIES, INC.
No User Serviceable Components Inside.
For service, contact Madrigal Audio Laboratories or an Authorized
Dealer. Any modification to this equipment will void all warranties.
dap
S/N
PR O C E E D R