Thor Compact HDMI, YpbPr, Modulators + AC3 - Manual (Page 8)

H-AC3-CMOD-QAM-LL
8
Installation
Follow these simple steps to avoid damaging the unit
Do not open the unit. Do not connect the unit to the powersupply before or during
assembly.Connect the unit as shown below
5 Steps for Success
1. Mount and tighten the screws and plugs
to securethe unit to the wall. Leave 10
cm of free space around from each unit.
2. Connect the signal input in the
respective connectors. The
signal source can be from a
surveillance monitor, DVD,
set-top box, CCTV and etc.
3. Optionally, connect the
loop-through RF inputcoaxial
cable.
4. Connect cable to RF output to
STB/TV.
5. Powersupply connection: a)
Connect the earth cable; b)
Connect the power plug to
2
3
4
5
1