Thor DVB ASI Over IP Gateway - Manual (Page 19)

. . . .
16 16 16 16
The device should now appear in the left hand menu tree. The device is now available
for the “open device” button. When you click open device all the parameters for the
device are now available for you to edit inside the software. You can click the “Get”
button to pull all of the current parameters from the device. You can make changes
then in the software and then click the “Set” button to write those parameters back to
the device. Once you have set the parameters it is important to click the “Save Config”
button on the top menu to make your changes permanent.