Thuraya IP Voyager User Manual
Page 13
• Package materials
13
Figure 1-3. Fitting the SIM card Cover
System power requirements
There is one power connection on the BDU. This must be connected to a 12 or 24Vdc
supply. Power requirements and consumption are as follows:
Voltage Input Minimum
10V
Voltage Input Maximum
32V
Total Current for ADU and BDU
(Max. @12V)
12A
Required Fuse
15A
Table 4. System power requirements
Fuse
The fuse is a 15 Amp, fast blow, ATO blade fuse. The installed part is from Littelfuse,
part number 0287015. To replace the fuse, pull fuse out of fuse holder (pliers may be
needed to grip fuse) and press new fuse into fuse holder. Spare fuses are provided
with your Thuraya IP Voyager terminal.
Power Cable
The Power cable uses a Phoenix contact #1718384 PC5/3 STCL-7, 62 connector and the
pinout is shown in the Table below.
Color
Function
Red
DC +
White
Ignition Sense +
Black
DC -
The optional accessory car adapter power cable, Hughes’ part number 3500472-0002,
includes a car adapter plug with a 20 Amp, 250 V fuse, and the ignition sense wire is
connected to the positive power wire in the plug.