Thuraya IP Voyager - Manual (Page 9)

• Package materials 9
Chapter 1 Introduction
The purpose of this guide is to provide assistance to personnel installing the Thuraya
IP Voyager mobile satellite terminal into a vehicle.
This terminal must be installed by Authorized Service
Personnel.
Note: Damages resulting in the failure to conform to the
instructions found herein, as well as standard installation
practices, will be the responsibility of the installer.
Thuraya IP Voyager satellite terminals
The Thuraya IP Voyager satellite terminal is composed of four core component parts:
the transceiver or Below Deck Unit (BDU), the antenna or Above Deck Unit (ADU), the
power connector/cable, and an RF cable.
Figure 1-1. BDU (left) and ADU (right) Land Mobile antenna