21 antenna vibration – Thuraya IP Voyager User Manual

Page 21

Advertising
background image

The Antenna - Above Deck Unit (ADU)

21

Antenna Vibration

The antenna is designed to meet the following operational vibration levels in any of

three perpendicular directions measured at the mounting base of the radome
Random Vibration:
1.05 grms with the following spectral density
5-20Hz………….0.02g

2

/Hz

20-150Hz……….-3dB/octave
Single Frequency Vibration:
5-10Hz with amplitude 2.54 mm
10-15Hz with amplitude 0.76mm
15-25Hz with amplitude 0.40mm
25-33Hz with amplitude 0.23mm

Note: Vibration levels in a typical installation are usually much less than the above

mentioned values. It is however the responsibility of the installer to verify, that the

cited levels are not exceeded in any mode of operation of the vehicle. In case of

abnormal vibration, typically at a resonance frequency, measures must be taken in

order to displace the resonance frequency or to dampen the vibration amplitude.

Advertising