Toyotomi BS-35(F) - Manual (Page 5)

5
SECTION B:
SPECIFICATIONS
SPECIFICATIONS
Model: BS-35(F)
Type:
Combustion Type Pressure Vapor
Flue Pipe Forced Exhaust
Heating Supply System Instantaneous
Ignition:
High Voltage Discharge Spark
Fuel:
Kerosene only
Efficiency:
85.7%
(1)
Hot Water Output:
35.2 kW (120,000 BTU/h)
Fuel Consumption:
4.0 lit/h
Capacity of Heat Exchanger:
8.8 lit.
Fuel system:
External tank
(2)
Dimensions (W x H x D):
260 x 700 x 510 mm
Weight:
25 kg (Empty)
Diameter of Required Exhaust Pipe:
φ106 mm
Maximum Length of Exhaust Pipe:
3 m, 3 bends or less
Electrical Rating:
220 Volts AC, 50 Hz
Ignition - 117W
Burning - 97W
Packaged Accessories:
Pressure relief valve (0.19 MPa)
Pressure reducing valve (0.17 MPa)
Exhaust pipe top, Metal fuel pipe (Copper
pipe), Remote control, Aluminum tape,
Extension cord for remote control (8m)
Silenser, Exhaust pipe elbow,
Fuel pipe joint
Safety Device:
Over-heat protector, Ignition safety
device, Empty burning safety device,
Heat exchanger bi-metal switch,
Tip-over switch
Exhaust Air Temperature:
less than 260ºC
Nozzle:
Quantity of Vapor 1.0 GPH
Spraying Angle 60º
(1) Heat and vaporized water are produced by the combustion process of this water heater.
This rating takes into account heat loss due to condensation of water vapor.
(2) External tank to be purchased from local suppliers.