TVLogic TDM-243W - Manual (Page 24)

24 Multiformat 3D Monitor
[7] WAVEFORM
5. Menu Operations
PAGE I >> PAGE II
WAVEFORM/VECTOR
WAVEFORM INTENSITY
WAVEFORM TRANS
WAVEFORM SIZE
LINE WAVEFORM ENABLE
LINE POSITION SELECT
LINE POSITION DRAW
OFF
OFF
OPAQUE
NORMAL
OFF
0
OFF
TDM-243W
<WAVEFORM>
<MODE 1>
<VECTOR>
<MODE 2>
<YCbCr/RGB>
<MODE 3>
WAVE
FORM
WAVE
FORM
VEC
TOR
Y
VEC
TOR
VEC
TOR
Y/R
WAVEFORM
Cb/G Cr/B
Cb Cr
• WAVEFORM INTENSITY
- Controls the brightness of the WAVEFORM/
VECTOR display.
- Available values are between 0 ~ 30. The
higher the number the brighter the waveform
will be.
• WAVEFORM TRANS
- Controls the transparency level of the
WAVEFORM/VECTOR.
- Available values are OPAQUE and TRANS..
* If the option is set to OPAQUE, the main OSD
will overlap with the waveform/vector.
However, it will automatically display it as
transparent and goes back to opaque if the
main OSD disappears.
• WAVEFORM SIZE
- Controls the size of WAVEFORM/VECTOR.
- Available modes are NORMAL and LARGE.
• LINE SELECT
- Selects the output line of WAVEFORM/
VECTOR.
- This item activates when LINE WAVEFORM
feature is selected.
• LINE WAVEFORM ENABLE
- This item is utilized to display the entire data
or one line data on the waveform.
• LINE POSITION SELECT
- In WAVEFORM / VECTOR SCOPE, use the Up/
Down button to select User’s desired line.
• LINE POSITION DRAW
- ON/OFF the line indication for line select
feature.
- Activates only when the LINE WAVEFORM
ENABLE feature is enabled.
- When this item is set to OFF, the Line
Waveform still displays if LINE WAVEFORM is
enabled.
Position changes if the value changes in
LINE SELECT option and the waveform
of the selected position displays.
WAVEFORM/VECTOR : WAVEFORM
LINE POSITION SELECT : ON
LINE POSITION DRAW : ON
WAVE
FORM