TVLogic XVM-175W - Manual (Page 31)

Multi Format LCD Monitor 31
XVM-175WD SDI A
●
USER CONFIG SET
- Used to save and apply three kinds of user
configuration.
- Available modes are USER1, USER2 and
USER3.
- Effective items for each USER1, USER2
and USER3 settings are [MARKER] menu of
MARKER, CENTER MARKER, SAFETY AREA,
MARKER MAT and MARKER COLOR
and [PICTURE] menu of , BRIGHT, CONTRAST,
CHROMA, PHASE, APERTURE and NOISE
REDUCTION
●
LOCK NUMBER
- Lock number is product’s serial number.
●
LOCK ENABLE
- Factory use only.
●
OSD DISPLAY
- Controls the OSD display time.
- Available values are 20 SEC, 6 SEC and
CONTINUE.
●
OSD POSITION
- Controls the OSD position.
- Available positions are CENTER, Top-
Right(R-T), Bottom-Right(R-B), Bottom-
Left(L-B) and Top-Left(L-T).
●
INTERNAL PATTERN
- This item generates internal white pattern.
- The white level select between 0% and 100%
(Per 5% increase or decrease)
●
SET DEFAULT
- User can use SET DEFAULT menu to initialize
to factory setting.
- Set default items are BRIGHT, CONTRAST,
CHROMA, PHASE and APERTURE and set 0.
[9] SYSTEM
5. Menu Operations
PAGE I >> PAGE II
USER CONFIG SET
LOCK NUMBER
LOCK ENABLE
OSD DISPLAY
OSD POSITION
INTERNAL PATTERN
SET DEFAULT
USER 1
XVM000000
--------
CONTINUE
L-T
OFF
XVM-175W_245W-N_325W-EN_V2.4.indd 31 2014-02-12 오후 5:36:20