Controls & functions, Front : xvm-175w – TVLogic XVM-175W User Manual

Page 8

Advertising
background image

8 Multi Format LCD Monitor

3. Controls & Functions

FRONT : XVM-175W

[STANDBY] lamp

- It affords power supply, which may be

indicated by indication lamp. The lamp is

RED during power supply and GREEN during

system is in operation. In case of power cut

and sudden shut off of the power, our

monitor keep previous setup stage.

[POWER] button

- Used to turn power on and off.

[ANALOG] button/lamp

- Used to select desired Analog Input. Press

the button to activate the analog input

menu selection, then use UP and DOWN

button to select desired input.

[PBP] button/lamp

- Used to select PBP(Picture-by-Picture) function.

[SDI-A] button/lamp

- Used to select SDI-A input.

[SDI-B] button/lamp

- Used to select SDI-B input.

[SCAN] button/lamp

- Used to change the Scan mode. The mode is

changed as the following sequence.

OVER SCAN -> ZERO SCAN -> UNDER SCAN

-> 2:1 SCAN -> 1:1 SCAN -> FIT WIDTH -> USER

ASPECT

[ASPECT] button/lamp

- Used when changing the monitor ratio on SD

signal mode to 16:9.

[BLUE] button/lamp

- You may remove R(red) and G(green) from

the input signal and play the screen only in

B(blue) signal. And if the button hit twice,

it will turn to MONO mode. (This mode use

only luminance value.)

[H/V DLY.] button/lamp

- Used when checking horizontal sync and

vertical sync simultaneously.

After applying Analog sync(CLK, H, V) check

whether the SYNC is corresponding with SDI,

Component, Composite modes.

[C.Temp] button/lamp

- Used to change Color Temperature.

[CHROMA] button

- Used when changing the CHROMINANCE

and PHASE values during menu in-activation.

One time of touch of the button will turn the

product to CHROMA mode, and if the button

is hit twice, to automatic PHASE setting.

(PHASE may be used only ANALOG mode.)

[W/F] button/lamp

- Used to activate the Waveform and

Vectorscope.

[MARKER] button/lamp

- Used to activate or inactivate the marker.

The desired aspect ratio can be displayed on

the screen properly when the type of marker

selected from the main menu.

XVM-175W_245W-N_325W-EN_V2.4.indd 8

2014-02-12 오후 5:36:17

Advertising
This manual is related to the following products: