Dynex DX-32L200A12 - Manual (Page 14)

10
Making connections DX-32L200A12/DX-37L200A12/DX-46L262A12
Using composite video (good)
To connect a cable or satellite box using composite
video:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a composite cable (provided) to the VIDEO,
L and R jacks on the side of your TV and to the
composite video and audio out jacks on the cable or
satellite box.
4 Turn on your TV, then turn on the cable or satellite
box.
5 Go through the setup wizard on page 15.
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the side of your TV and to the
coaxial out jack on the cable or satellite box.
4 Turn on your TV, then turn on the cable or satellite
box.
5 Go through the setup wizard on page 15.
AV
I
Side of TV
Cable or satellite box
Co
m
po
sit
e c
ab
le
Connect red to red,
white to white, and
yellow to green.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Side of TV
Coaxial cable
DX-32L-37L-46L_11-1082_MAN_V2_EN.book Page 10 Tuesday, November 22, 2011 1:09 PM