Dynex DX-32L200A12 - Manual (Page 17)

Making connections
13
DX-32L200A12/DX-37L200A12/DX-46L262A12
Connecting a composite video device
(good)
To connect a composite video device:
1 Make sure that your TV’s power cord is unplugged
and the composite video device is turned off.
2 Connect a composite cable (provided) to the VIDEO
and L and R audio jacks on the side of your TV and to
the AV OUT jacks on the composite video device.
To play from the composite video device:
1 Turn on your TV, then press INPUT to open the
INPUT SOURCE list.
2 Press or to select AV, then press ENTER.
3 Turn on the composite video device, then set it to
the output mode. See the documentation that came
with the device for more information.
Connecting a VCR
To connect a VCR:
1 Make sure that your TV’s power cord is unplugged
and the VCR is turned off.
2 Connect a composite cable (provided) to the VIDEO
and L and R audio jacks on the side of your TV and to
the AV OUT jacks on the VCR.
To play from the VCR:
1 Turn on your TV, then press INPUT to open the
INPUT SOURCE list.
2 Press or to select AV, then press ENTER.
3 Turn on the VCR, then set it to the output mode. See
the documentation that came with the VCR for more
information.
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Note
You can also press VIDEO to select the composite
device.
AV
I
Side of TV
Composite video device
Connect red to red, white
to white, and yellow to
green.
Co
m
po
sit
e c
ab
le
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Note
You can also press VIDEO to select the VCR.
AV I
Side of TV
VCR
Connect red to red, white
to white, and yellow to
green.
Co
m
po
sit
e c
ab
le
DX-32L-37L-46L_11-1082_MAN_V2_EN.book Page 13 Tuesday, November 22, 2011 1:09 PM