Analog Way Optimizer HD - OHD888-AG - Manual (Page 21)

OPTIMIZER HD Chapter 5 : REMOTE CONTROL SOFTWARE (continued)
PAGE 21
5-3. COMMUNICATION SETUP (continued)
• CASE OF LAN PORT:
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(CONTROL > LAN setup), then activate the LAN communication port (CONTROL > RS232/LAN port >
LAN).
- With the Controls menu of the software, select RS232/LAN Setup and select UDP or TCP. Then configure the
Local port, the Remote IP address and the Remote port and click on OK to setup the new values. The software
will also display Device connected.
5-4. USING THE SOFTWARE
c Click on the Input button, and select the needed adjustments.