DigiTech RP50 - Manual (Page 14)

(displayed as Gb).The display window briefly flashes the selected tuning preference. Exit
tuner mode by pressing either Footswitch. The tuning reference is retained when the unit is
turned off.
Bypass
The RP50 presets can be bypassed for a clean, unprocessed guitar tone. To bypass the
RP50, press both footswitches simultaneously. The display reads
By indicating the preset is
bypassed. Press either footswitch to exit Bypass and return the the last selected preset.
Editing/Creating Presets
Creating your own signature sound with the RP50 is easy and intuitive. The RP50 lets you create
your own presets, or fine tune existing Presets to suit your needs. When creating or editing a
sound, you must start with a User or Factory Preset. It is not possible to start with an empty
preset. You can save your preset to any User Preset location while storing the preset (see
Storing a Preset pg 12).
To edit or create a Preset:
1. Press the FOOTSWITCHES to select a preset
2. Press the EDIT buttons in conjunction with the Effect LEDs to choose the effect you want
to edit.
3. Press the VALUE Buttons to change the parameter values.
10