DigiTech RP50 - Manual (Page 22)

of effect as if two guitars were playing the same part together. Use the Value buttons
to select one of the nine Detuner settings.
Pitch Shift ( H1-H9 )
The Pitch Shifting copies the incoming signal, and shifts the pitch of the copy to a
different note.The shifted note is mixed back with the original signal sounding as if two
guitars were playing different notes. Use the Value buttons to select one of the nine
Pitch Shift settings. The Pitch Shift settings are as follows:
Whammy™ ( Y1-y9 )
Whammy™ is an effect that uses an Expression Pedal to bend the pitch of the
incoming signal, or add a bendable harmony with the original signal. As the Pedal is
moved, the note bends either up or down. Use the Value buttons to select one of the
nine Whammy™ settings. W denotes Whammy bends and H denotes harmony bends.
The Whammy settings are as follows:
y1=W Octave Up
y2=W 2 Octaves Up
y3=W Octave Down y4=W 2 Octaves Down
y5=H m3rd/Maj 3rd Up
y6=H 2nd/Maj 3rd Up y7=H 3rd/4th Up
y8=H Octave Up
y9=H Octave Down
H1= -12 semitones
H2= -7 semitones
H3= -5 semitones H4= -4 semitones
H5= +3 semitones
H6= +4 semitones H7= +5 semitones
H8= +7 semitones
H9= +12 semitones
18