DigiTech RP50 - Manual (Page 25)

Cabinet Modeling is now enabled for all amp models in all presets. The following lists what
cabinet accompanies each model:
b1-b9 – Blackface – 2x12 Cabinet
o1-o9 – Boutique – Vintage 4x12 Cabinet
r1-r9 – Rectifier – Vintage 4x12 Cabinet
H1-H9 – Hot Rod – British 4x12 Cabinet
t1-t9 – Classic Tweed – 2x12 Cabinet
C1-C9 – British Combo – 2x12 Cabinet
c1-c9 – Clean Tube – British 4x12 Cabinet
s1-s9 – British Stack – British 4x12 Cabinet
U1-U9 – Crunch – Vintage 4x12 Cabinet
G1-G9 – High Gain Tube – British 4x12 Cabinet
F1-f9 – Fuzz – British 4x12 Cabinet
Factory Reset
This function resets the RP50 to its original factory settings.This procedure erases all
custom user presets. Performing this function erases all user-programmed data.
All such data will be lost forever!
The procedure for performing a Factory Reset is as follows:
1. Disconnect the power supply from the RP50 (AC Power) or unplug the guitar from the
input jack (battery power).
2. Press and hold the left EDIT button while re-connecting the power or plugging your
guitar into the RP50’s input.
3.When the display reads --, release the button and press the STORE button. The display
reads rE. The RP50 is now restored to its factory settings.
21