Argox CP Series - Manual (Page 13)

13
Compact Printer Series - User
’s Manual
Attaching Power
1. Make sure the printer’s power switch is in the off position (down).
2. Insert the AC power cord into the power supply.
3.
Insert the power supply’s power connector into the printer’s power
jack.
4. Plug the other end of the power cord into an appropriate grounded
AC electrical outlet.
CP-2140, CP-2140Z, CP-3140L, CP-3140ZL
Warning:
Do not operate the printer and power supply in an area where they
might get wet.
Power Supply
Power Cord
Power
Connector
Power Jack