Figure 8 - sample rate indication – ART Pro Audio TubeFire 8 - Eight Ch. Mic Pre with Firewire User Manual
Page 14
Advertising
Changing the sample rate may lead to other issues, including audio dropouts. Monitor the ASIO Drop Outs
for 10 - 20 seconds to assure that the number remains at zero. If they are NOT zero, then increase the buffer
length until the ASIO Drop Outs number reduces to zero.
NOTE: The front panel Sample Rate display on the TubeFire 8™ is a histogram. FIGURE 8 shows the
display lit for a 48KHz sample rate. This makes reading the display much easier at a distance. ALL of the lights
are lit when the unit is set to 96KHz.
FIGURE 8 - Sample Rate Indication
13
Advertising