Artesyn ATCA-7365 Installation and Use (November 2014) - Manual (Page 157)

Functional Description
ATCA-7365 Installation and Use (6806800K65N) 157
One Ethernet port is available on the front panel. Additional Ethernet ports for external access
are provided via the RTM.
The Ethernet controllers support I/O virtualization.
5.8 Storage Controller
Using an optional RTM, the Blade provides a Serial Attached SCSI (SAS) controller. One on-
board hard disk drive located on the RTM is connected to the controller. A minimum of two (2)
ports are available on the RTM face plate. They can be used to attach an external storage RAID
(JBOD). Another SAS port of the controller is routed to ATCA Zone 3 for the purposes of
synchronizing with a RTM based disk located in a logically paired ATCA slot.
5.9 Embedded Flash Disk
The ATCA-7365 by default, provides an onboard USB Flash module (4GB) solid state disk. The
disk can keep data, application SW and OS boot images. Booting from the device is supported.
The flash disk controller provides a wear leveling algorithm to improve the longevity of the
flash device.
5.9.1 SATA Embedded Flash Solid State Disc (SSD)
As an option, a SATA embedded flash SSD solution can be provided through assembly of the
ATCA-7365/SATA module which is available as an accessory kit.
Table 5-1 Ethernet Controller Types
Interface Location Controller Count Ethernet Type
Base Interface P23 Intel 82576 2 x 10,100,1GB copper
Fabric Interface P23 Intel 82599 2 x 10G/1G Serdes
Faceplate Interface
P27 Intel 82567 1 x 10,100,1 GB Copper
Update Channel IF P20 Intel 82572 1 x 1 GB Serdes