Artesyn ViewCheck on ATCA-9405 Installation and Use (May 2014) User Manual
Page 36
Installation of ViewCheck
ViewCheck on ATCA-9405 Installation and Use (6806800S51D)
36
information, see
Obtaining the Activation Record
.
3. SP should also have the interfaces to PP1 and PP2 configured so that a
communication can be established between SP and PP's.
4. After the activation record is placed, first restart the BSF services on 9405 SP and
then on 9405 PP as below:
sh /opt/ssf/etc/config/S99SsfBsfRun.sh restart
5. The license generated can be exported to TFTP server to avoid copying of
activation records into the blade for every reboot of OOSD image. To export
license, run /etc/rc.d/init.d/exportLicense.sh
/etc/rc.d/init.d/exportLicense.sh
Please enter the TFTP server to store the license
files[xxx.xxx.xxx.xxx]: 192.168.21.1
Please enter username: root
Please enter password:
Exporting licenses.....
License files transfer completed. For details check
/var/log/exportLicense.log log file.
Make sure that vsftpd daemon is running on the blade. Otherwise, you can start using
command, service vsftpd start.
The TFTP server IP mentioned while exporting the license should be same from where
OOSD image will be loaded.