Artesyn ViewCheck on PrAMC-7311 Installation and Use (May 2014) - Manual (Page 33)

Installation of ViewCheck
ViewCheck on PrAMC-7311 Installation and Use (6806800S45C) 33
/opt/diagnostics/etc/init.d/diagcore restart
5. The license generated can be exported to TFTP server to avoid copying of activation
records into the blade for every reboot of OOSD image. To export license, run
/etc/rc.d/init.d/exportLicense.sh
/etc/rc.d/init.d/exportLicense.sh
Please enter the TFTP server to store the license
files[xxx.xxx.xxx.xxx]: 192.168.21.1
Please enter username: root
Please enter password:
Exporting licenses.....
License files transfer completed. For details check
/var/log/exportLicense.log log file.
Installing ViewCheck Service OS Image on USB
Use the flashrc tool available on the board to install the ViewCheck service OS image on USB
device.
For more information, refer section 2.3.1 in Blade Services Software on PrAMC-7311 Programmer’s
Guide.
4.5 Access and Execution of a Test Using CLI
You can access ViewCheck CLI using the following procedure:
1. Establish the secure shell using SSH or Putty.
2. Start the Telnet connection from an already established secure shell.
The TFTP server IP mentioned while exporting the license should be same from where
OOSD image will be loaded.