Operation – Avalon Firestyles Hideaway E Fireplace User Manual
Page 10
10
© 2010 Travis Industries Inc.
100-01183_000
Operation
A. Flame/Heat On/Off
Press the
A. Flame/Heat On/Off button to turn the Flame/
Heat function on. When the
D. Set Temperature is higher
then the
C. Room Temperature the heat will come on. To
turn the heat off, lower the
D. Set Temperature so that it’s
setting is lower then the
C. Room Temperature. The
default temperature setting is 72°F (22°C).
! NOTE: When using the remote control the heater
runs on a thermostat. Press the
J. Temperature
Up or I. Temperature Down button to adjust the set
temperature. Once the desired set temperature is
reached the heater will turn off. The heater will cycle on
and off to maintain the desired set temperature.
B. Audio On/Off
The fireplace includes an audio system.
Press the
B. Audio On/Off button to turn the Audio
System on and off. When the Audio function is on, the
volume level bars will appear on the remote control display.
When off, the volume level bars will turn off.
The default setting for the Audio System is set at a middle
volume setting. Press the
Q. Audio Volume Down button
to turn the volume level down, or press the
R. Audio
Volume Up button to turn the volume level up.
! NOTE: To turn the Flame/Heat and Audio functions off
at the same time, press and hold both control buttons
simultaneously.
D. Set Temperature
1. Press
A. Flame Heat On/Off button to turn fireplace on.
2. Press
J. Temperature Up to raise thermostat.
3. Press
I. Temperature Down to lower thermostat.
Press both
J. Temperature Up and I. Temperature Down
to change
°F to °C.
E. Light Dimmer
1. Press the
A. Flame/Heat On/Off button to turn the
Flame/Heat on.
2. Repeatedly press the
L. Dimmer Up or K. Dimmer
Down button to decrease or increase the brightness of
the upper lights.
F. Flame Speed Control
1. Press the
A. Flame/Heat On/Off button to turn the
Flame/Heat on.
2. Press the
N. Flame Speed Up to increase the speed of
the flame.
3. Press the
M. Flame Speed Down to decrease the
speed of the flame.
G. Sleep Timer
The Sleep Timer automatically shuts off the fireplace after a
preset time (from 30 minutes to 8 hours).
1. Press the
A. Flame/Heat On/Off button to turn the
Flame/Heat on.
2. To set the sleep timer press the
P. Sleep Timer Up
button.
3. Set the timer from 30 minutes through 8 hours.
4. The fireplace will automatically turn off when the sleep
timer reaches 0 minutes.
5. The sleep timer can be cancelled at any time by
pressing the
O. Sleep Timer Down button repeatedly
until the sleep timer displays “0”.
I
J
K
L
M
N
O
P
Q
R
A
B
C
E
G
D
F
H
A. Flame/Heat On/Off
B. Audio On/Off
C. Room Temperature
D. Set Temperature
E. Light Dimmer
F. Flame Speed Control
G. Sleep Timer
H. Audio Volume
I. Temperature Down
J. Temperature Up
K. Dimmer Down
L. Dimmer Up
M. Flame Speed Down
N. Flame Speed Up
O. Sleep Timer Down
P. Sleep Timer Up
Q. Audio Volume Down
R. Audio Volume Up
Figure 14