Avalon Firestyles DVS Insert EF-2001 to 2005 - Manual (Page 9)

Installation
(for qualified installers only)
9
© Travis Industries
4041213
1 0 0 - 0 1 1 5 0
Insert Clearances
• Due to the high temperature of the
fireplace, it should be located out of
traffic and away from furniture and
draperies.
Mantel Clearances
The mantel must be a minimum 10”
above the face and a maximum 8” deep.
NOTE: The combustible area above the
facing must not protrude more
than 3/4" from the facing. If it
does, it is considered a mantel
and must meet the mantel
requirements listed in this
manual.
Face Dimensions
Min. 6”
Side
Wall
Combustible Mantel
Min. 6”
Top Facing
Min. 8”
Side
Facing
12” Min.
Min. 10”
*See “Face Dimensions” Below for
the face being used.
See Below*
See Below*
Lopi
Discovery
DVS
21-9/16”
32”
Avalon
Rosario
DVS
21-9/16”
32”
FPX Rectangular DVS
30”
22”
Lopi Heritage Bay
DVS
31-5/8”
21-1/2”
5-7/8”
Avalon Salish Bay
DVS
5-3/8”
22-1/2”
30-1/2”
22”
3-1/2"
30”
Radius = 34”
FPX Arched
FPX Artisan
NOTE: artisan faces
vary in size.
2”
Avalon Cambridge DVS
33-7/8”
33”
FPX
Architectural Faces
29-7/8”
22-3/4”
21-1/2”
32”
21-1/2”
2-3/8”
2-1/2”
23-5/8”
11-1/8”
Avalon
Craftsman Face
Lopi Bedford Face
34-1/8”
22-3/4”
(+ 5/8” for
installation)
33-1/8”
2-1/4”
32”
22-1/2”
Avalon
Victorian
Avalon
Rawhide
22 1/2”
32”