Avery Dennison 6035 Programmer Manual Rev.A 7/98 - Manual (Page 149)

7/9/98 ROM-DOS 6.22 Command Descriptions 3-91
N U M L O C K
CONFIG.SYS
Purpose
Sets the Num Lock key on the keyboard to ON or OFF when your
computer starts.
Syntax
NUMLOCK=[on|off]
Remarks
Selecting ON designates that the Num Lock key is set to on when DOS
boots. Selecting OFF designates that the Num Lock will be off when
DOS boots. In either case, you still have the ability to manually turn
the Num Lock key on and off after boot up with the NUMLOCK
command.
Examples
NUMLOCK=on
Sets the Num Lock key to on when the system boots.