Reconfigure gear set – Avery Dennison SNAP 500 Short Feed User Manual
Page 10
Advertising
581396-1.2.doc
SNAP 500 Short Feed Addendum
Reconfigure Gear Set
1. Flip inside feed drive gear around so that the drive gear hub is facing the front of the machine. (before this retro-
fit, the hub will normally be facing the back of the machine). The feed roller shaft must be pulled toward the front
of the machine approximately 3” to flip the drive gear.
FEED DRIVE GEAR
DRIVE GEAR HUB
FEED ROLLER SHAFT
Advertising