Lip edge – Avery Dennison SNAP 500 Short Feed User Manual
Page 16
Advertising
581396-1.2.doc
SNAP 500 Short Feed Addendum
5. Install all (4) rollers into the inner roller bracket. Once all four are seated correctly, remove the spring holder tool.
SNAP 500 OR 600
DRIVE ROLLER
SMOOTH
ROLLER
INNER ROLLER
BRACKET
6. Retain the roller springs in the outer roller bracket in the same way as shown in step 4. Make sure spring holder tool
is locked into position, via. the lip edge.
SPRING
HOLDER
TOOL
OUTER
ROLLER
SUPPORT
PULL
WIRE
LIP EDGE
Advertising