4 projection setup – Awind WIGA / WGA-210 User's Manual User Manual
Page 33
Advertising
33
♦ <Enable>: Default value, Show server IP, Resolution, Firmware
version, SSID, channel and security on the screen.
♦ <Some Information>: Show server IP and SSID on the screen
only.
5.4.4 Projection Setup
Click [Projection Setup] button
♦ <Resolution>:
VGA: XGA(1024*768), WXGA(1280x800) ,WXGA (1280*768) and
SVGA(800*600). The default value is XGA.
HDMI: 720p(1280*720)
♦ <Screen Refresh Rate>: This is VGA output refresh rate, provides
60 Hz and 75Hz to suit for different kinds of projectors.
♦ <Login Code>: You can select “Disable”, “Random”, or “Use the
following code” to set a specified 4-characters Number.
♦ <Apply>:Confirmation and Save modifications
♦ <Cancel>: Cancel all the modifications
Advertising