Axel AX4020 Installation Guide - Manual (Page 10)

Setting-Up the AX4020
________________________________________________________________
Installation Guide - AX4020 Office Server
7
Notes:
- The set-up session can also be exited by pressing the administrator
switch (in this case, modifications are discarded).
- During set-up mode, the two leds of the Ch8 port remain lit.
3.2 - FROM A TELNET SESSION
To run set-up within a telnet session, the IP address of the AX4020 must
already be set.
Run the telnet session from any network host. Use 4096 as the telnet port.
The set-up main menu will then display on the console.
When the set-up session has been completed, the AX4020 automatically
terminates the telnet session.