BAFO BF-2043 User Manual
Page 11
Advertising
USB 2.0 to IDE 2.5” hard disk Enclosure User’s Manual 10
/
/
/
/
6
7
6
7
6
7
6
7
8
8
8
8
( 9
0
6
7
8
7.4.1 Connect the USB port of
USB2.0 to IDE 2.5” hard disk enclosure
to PC
with USB cable. System will auto detect the device and load the driver
then create a new device and name of “
Local Disk (E:)
” at desktop as
shown below.
7.4.2 You should check
“My Computer”-“Control Panel”-“System”-”Device
Manager”
to make sure the driver has already installed. Then, in the
“Disk Drives”
it will show a
“FUJITSU MHM2050AT” (This model
number will vary with different Hard Disk),
in the
“Hard disk
controllers”
it will show a
“Storage Adapter Bridge Module”
, and in the
“Universal Serial Bus controller”
it will show a new item of
“USB Mass
Storage Device”
.
Advertising