BAFO BF-120 - Manual (Page 10)

USB To Irda Adapter User’s Manual 9
. % 4 5 ) 6 /$ ) "!!" /$ ) "!!" /$ ) "!!" /$ ) "!!"
Following the steps below to install driver of USB to IrDA Adapter USB cable:
6.3.1 Power on the computers that you will connect the USB to IrDA Adapter
and make sure the USB port is enabled and can working properly.
6.3.2 Put the driver CD into the CD-ROM and run the D:\Driver\BF-120
\Infineon\Windows\SETUP.EXE or D:\Driver\BF-120\Vishay 6101E
\Windows\SETUP.EXE or D:\Driver\BF-120\Vishay 6102F\Windows
\SETUP.EXE. (According with the different transceiver type, you
have to install the different driver.)
6.3.3 As the windows appear as below, click “NEXT” to continue.
6.3.4 You can choose the destination folder that you want to install or use the
default setting (C:\WINNT\SigmaTel\USB-IR), then click “NEXT” to
continue.