Baumatic BCG605SS User Manual
Page 21
Cleaning the burners
o
Gas burners should be cleaned regularly and after each spillage
to remove cooking residues and dirt.
o
To clean the burners, remove
the caps and rings and place
them separately in warm
soapy water. After cleaning
them, check that the burner
ports are clear.
o
The body near the nozzle
should always be clean. Dirt
accumulating around the
nozzle may clog it, as a result
of which the burner will not
light or will light only with a
small flame. To clean the
nozzle use a brush soaked in
solvent.
o
Dry all the elements of the burner carefully as wet elements may
not light properly. Assemble the clean and dry burners carrying
out the disassembly steps in reverse order.
Cleaning the oven
o
The oven compartment is coated with vitreous enamel. To clean
particularly difficult burnt spots a special oven cleaning agent
may be used. However, as these agents are caustic, be careful
when using them and follow the manufacturer’s guidelines.
Warning: Do not steam pressure clean the oven.
Always wait until the oven cools down before cleaning.
21