Baumatic BCG520SL User Manual
Page 27
Securing the safety chains
o
Before securing the safety chains, check that you have
completed the installation process and that all connections have
been made successfully and that the cooker is in its final
operating position.
o
To fix the security chains to their anchor brackets: Loosen
the hex nut at the unattached end of the safety chain, until it is
flush with the screw end. Do not remove it completely.
o
Insert the screw head into the top hole of the anchor bracket by
tilting it sideways so that it is at an angle to the top hole when it
is inserted.
o
When the screw head is fully engaged in the bracket, tilt it
upwards so that it is straight, and tighten the hex nut to secure
the end chain link into position.
27