Baumatic BCG520SL - Manual (Page 30)

Gas Safety (Installation and Use) Regulations
o
It is the law that all gas appliances are installed by competent
persons in accordance with the current edition of the Gas Safety
Installation and Use Regulations.
o
It is in your interest and that of safety to ensure compliance with
the law.
o
In the UK, GASSAFE registered installers work to safe standards
of practice. The cooker must also be installed in accordance with
the current edition of BS 6172. Failure to install the cooker
correctly could invalidate the warranty, liability claims and lead
to prosecution.
o
IMPORTANT: It is a requirement for a stability chain to be
fitted to the appliance. Please see pages 26-27 for more
detailed information on this.
Gas connection
ALL INSTALLATION AND SERVICE WORK MUST BE
CARRIED OUT BY A GASSAFE REGISTERED
ENGINEER.
o
Prior to installation, ensure that the gas supply conditions
(nature of the gas and gas pressure) and the adjustment
conditions are compatible. The adjustment conditions for this
appliance are stated on the rating plate which can be found on
the back cover.
o
This appliance is not designed to be connected to a combustion
product evacuation device. Particular attention should be given
to the relevant requirements regarding ventilation.
o
In compliance with the
manufacturer’s installation
instructions, the adaptor elbow
should be connected to the gas
inlet at the rear right corner of
the appliance and pointing in a
downward direction. As indicated
in the diagram opposite.
o
IMPORTANT: THE FIBRE WASHERS SHOWN IN THE ABOVE
DIAGRAM MUST BE IN PLACE WHEN CONNECTING THE
ADAPTOR ELBOW.
30