Baumatic BMC455TS - Manual (Page 25)

o
When the desired settings are shown on the display,
press the start button (25) to begin the cooking process.
The time will count down on the display.
o
IMPORTANT: You must set a cooking time or the start
button will not work and the display will show the time
flashing.
o
At the end of the cooking time, a beep will signal the end of the
program. Press any button on the control panel or open the door
to silence the acoustic signal. After 1 minute, the machine will
turn itself off if no other function is selected.
Using the microwave and fan oven function
o
Turn the appliance on by pressing the ON/OFF button
(27) once.
o
Press the microwave and fan oven selection button (10)
to choose the microwave and fan oven function.
o
Use the increase (14) and decrease (13)
buttons to adjust the default microwave power in
150W intervals. The maximum power level is 450W.
o
Confirm the power level by pressing the confirm button
(12).
o
The top display will change from showing the power value to a
temperature value. Use the increase (14) and decrease (13)
buttons again to set the temperature of the fan oven in 5°C
intervals. The maximum temperature is 200°C.
o
Confirm the temperature by pressing the confirm button (12).
o
You can then use the plus (19) and minus (20)
buttons to set the required cooking time in 5
second intervals. If you hold down either of these buttons for
about 3 seconds, the scrolling speed will increase.
o
When the desired cooking time is displayed, press the confirm
button (12) to set the time.
o
When all the correct settings are made, press the start
button (25) to begin the cooking process. The time will
count down on the display.
25