Baumatic BDF665W - Manual (Page 23)

Drying
Rapid A shorter wash
for lightly
soiled loads
that do not
need drying.
Wash
(40°C)
Rinse
Rinse
(40°C)
20 grams
(main
wash)
30
minutes
11.0 0.50
* Economy is the testing program for EN 50242.
** The wash program times that are quoted are intended as a guide
only. Please note that factors external to the machine, e.g. the
temperature of your water supply, your water pressure etc. can affect
the time it takes for the wash program to complete.
Setting a wash program
Make sure that the “Before first use” section has been
followed.
o
Check whether the appliance needs rinse aid or salt adding to it.
o
Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o
Push the top and bottom baskets fully back into position.
o
Add detergent
o
Close the door firmly, so that you hear the door lock click shut.
o
Switch the appliance on by using the power button, the power
indicator neon will light.
o
IMPORTANT: Wait for 5 seconds before pressing a
program selection button, otherwise the appliance may
not function correctly.
o
Press the relevant program selection button to choose an
appropriate wash program for the load that you are washing.
The program indicator neon above the program selection button
that you have pressed will light.
o
Select any program option that you want to use (e.g. delay
start).
o
After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
23