Baumatic BDF665W - Manual (Page 25)

25
Setting a delay start
It is possible to delay the start of the wash program for a maximum of
24 hours.
o
Check whether the appliance needs rinse aid or salt adding to it.
o
Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o
Push the top and bottom baskets fully back into position.
o
Add detergent
o
Close the door firmly, so that you hear the door lock click shut.
o
Switch the appliance on by using the ON/OFF button, the power
on indicator will light.
o
IMPORTANT: Wait for 5 seconds before pressing a
program selection button, otherwise the appliance may
not function correctly.
o
Press the relevant program selection button to choose an
appropriate wash program for the load that you are washing.
The program indicator neon above the program selection button
that you have pressed will light.
o
Immediately press the display start button to set the period of
time that you want to delay the wash cycle for.
o
The period of time will increase in 1 hour intervals, each time
that you press the delay start button. The period of time that
you have set will appear on the LED display.
o
The maximum delay start period that can be set is 24 hours.
o
After the delay time has elapsed, you will hear the appliance
begin to fill with water and the wash program will start.