Baumatic BDF665W - Manual (Page 35)

35
Dishes and
pans are not
clean
Improper program
Improper loading
Select a more intense wash
program.
Make sure that the spray arms and
the detergent dispenser are not
being impeded by large dishes.
Spots and
filming on
glasses and
pans
Extremely hard water
Low inlet
temperature
Improper loading
Improper detergent
Incorrect salt/rinse
aid levels
Refer to the relevant sections of this
booklet, to ensure that the
detergent, salt and rinse aid levels
are set correctly. Ensure that the
appliance is loaded correctly.
Steam A normal
phenomenon You may get a small amount of
steam coming through the vent by
the door latch, during drying and
water draining.
Black or grey
marks on
dishes
Aluminium utensils
have rubbed against
dishes
Use a mild abrasive cleaner to
eliminate the marks. Make sure that
the appliance is loaded correctly in
future.
Water
standing in the
bottom of the
tub
This is normal A small amount of clean water in the
base of the appliance is not
something to be concerned about.
Dishwasher
leaks The rinse aid
dispenser is
overfilled or rinse aid
has been spilt inside
the appliance
Dishwasher isn’t
level
Take care not to overfill the rinse aid
dispenser. Spilt rinse aid could cause
oversudsing and lead to overflowing.
Wipe away any spills immediately
with a damp cloth.
Make sure that the dishwasher is
level.