Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 50)

50
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
You can choose between:
• a point of interest in the vicinity,
• a point of interest near to an address,
• a point of interest near to a destination,
or
• entering a point of interest directly.
Point of interest in the vicinity
> Press the
POI nearby button.
Press the arrow keys to scroll
through the list displayed.
> Select one of the available categories.
For some categories, e.g. petrol stations, a
further selection menu is displayed in
which you can narrow down the choice
further, e.g. by brand.
If you have selected the category, any
points of interest belonging to the relevant
category and available within the area in
question will now be displayed.
The name, distance as the crow flies and
the address is displayed for each entry.
> Select the desired point of interest.
You will now receive additional informa-
tion about your chosen destination.
> Press the
Start button to begin route
guidance to the point of interest direct-
ly.
In addition, the selected point of interest
can be:
• displayed on the map (
On map ),
• saved in fast access mode ( Save ),
• used for displaying a route to the POI
( Show route ),
• called if a telephone is connected and a
phone number is provided ( Call ).
Note:
You can also press the
All categories but-
ton. An input menu will then open and
you can enter the name of a point of in-
terest directly and confirm it.