Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 71)

71
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
The Format button
In the Format settings window you can
set the measurement units to be used for
times and distances.
> Press
Format in the settings menu.
The Format settings window appears.
Press the field next to Time to switch be-
tween the 12 hour clock and the 24 hour
clock.
Press the field next to
Distance to switch
between kilometres and miles.
> Confirm your settings by pressing the
OK button.
The Time button
You can select the time zone relevant for
your location in the Time settings win-
dow. This setting is important for the cor-
rect calculation of the estimated time of
arrival.
> Press
Time in the settings menu.
The Time settings window appears.
Using the button next to Time zone you
can set whether the time zone should be
set automatically by Traffic Assist Pro or
not (automatic mode on
automatic
mode off ).
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
Time zone .
Pressing the button below Daylight
saving time allows you to select whether
daylight saving time should be set auto-
matically by Traffic Assist Pro or whether
you switch daylight saving time on and off
yourself.