Belshaw Adamatic TG50 Thermoglaze - Manual (Page 21)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Thermoglaze MN-1720WM 15
8. Remove the conveyor assembly through the
outfeed end of the oven.
WARNING
Failure to wash the conveyor chain daily may
cause damage to the conveyor drive motor.
The Thermoglaze will shut down if the chain
becomes stiff from glaze buildup. After
cleaning, the motor reset button may need to
be pressed, located under the control panel.
9. Remove the oven crumb tray.
10. Open the safety cover.
11. Loosen the lower glaze hose clamp.
12. Remove the lower glaze hose clamp and
gasket.