Belshaw Adamatic TG50 Thermoglaze - Manual (Page 28)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
22 MN-1720 Thermoglaze 50
14. Pull the drive coupling back and line it up
with the conveyor drive shaft.
15. Install the glaze drain tray.
16. Connect the drive belt.
17. Install the rear panel by making sure the key
attached to the rear panel is inserted into the
safety interlock switch, then screwing in the
thumb screw.
NOTE
The glaze pump will not run with the rear
panel removed.